Arista's video projection mapping turnkey system was designed and configured to minimize the setup/tear down time and effort to a minimum. The turnkey system consists of two major critical sections. One is a powerful video processing computer and one is a 5U 16 blade HDBaseT signal distribution product that can be populated with up to16 HDBaseT transmitters. Everything is pre-configured and pre-connected. The only thing you need to do before the event is to connect etherCON cables to projectors and disconnect etherCON cables from projectors after the event. This turnkey system can save you tremendous amount of time and effort.
RS-124 -A07
Features
- Extension of audio, video, IR control, Ethernet, and power, over a single CATx cable.
- Supports 4K (UHD) video with resolutions up to 3840 x 2160.
- 10.2 Gbps of bandwidth on all channels.
- Also supports 3D and Deep Color resolutions.
- HDCP compliant and Blu-ray ready.
- EDID pass-through.
- Receiver is powered by PoE.
- Transmitter provides up to 36W power over PoE.
The Arista RS-124-A07 is a 1U Rack Mount HDBaseT product that can be configured and ordered in flavor of dual HDBaseT transmitters or receivers with different video signal format inputs and outputs. The Arista RS-124-A07 provides numerous configurations and functionalities to meet ever changing requirements of ProAV events. The RS-124-A07 minimizes installation time and effort while also providing a significant maintenance advantage and configuration flexibility.
100BaseT Ethernet Hub
RS-124-A07 has a 100BaseT Ethernet port that supports Ethernet pass-through. This Ethernet pass-through port enables the control over HDBaseT if projector has built-in HDBaseT receiver and control over Ethernet.
RI0-A07
RI0-A07-TX08 Display Port Input
The video processor unit with Display Port output will find RI0-A07-TX08 very useful since it has Display Port input and no conversion is required.
RI0-A07-TX05 HDMI Input, HDMI Loop Back Output
You will find HDMI Loop-Back output very useful when you want to monitor the video source from the transmitter. RI0-A07-TX05 has HDMI splitter built-in to provide HDMI video loop-back output that allows you or your installer to display or monitor video source.
RI0-A07-TX09 Display Port Input, 3G-SDI Loop Back Output
The video processor unit with Display Port output will find RI0-A07-TX08 very useful since it has Display Port input and no conversion is required. It provides 3G-SDI Loop Back output for video source monitoring purpose. All video sources from GPU Display Port output can be monitored view SDI multi-view monitor.
RS-124 -31
Features
- Distribute 4K UHD AV signals via 10GbE network switches
- Broadcast Quality Scaling
- Display adaptive scaling in 1×n signal distribution
- True seamless switching in n×m signal switching
- Adaptive Clock Re-synchronization (ACR)
- Colorspace Conversion
- Frame-rate Conversion
- Highly flexible audio capabilities
- Multi-view, PIP, and PAP
- Video wall processing
- USB, RS-232, IR Extension and Switching
- Provides 1GbE Ethernet over 10GbE Network
Uncompressed 4K streaming, zero latency, AV over IP is the future of AV signal distribution
Encoder with Copper Interface
Arista's IP Flash Caster has forever changed the dynamics of the pro-AV industry by letting installers and System Integrators replace proprietary AV matrix switches with off-the-shelf Ethernet switches that deliver higher performance, flexibility and scalability. Arista’s IP Flash Caster aims to redefine the AV signal processing & distribution system architecture by delivering a single,cost-effective & scalable AV signal processing & distribution unit that integrates the functionality of several costly, discreet, single-function components.
Encoder with Fiber Interface
Arista's IP Flash Caster is an end-to-end system for AV and KVM signal extension, IP-based switching, video wall and multi-view. The product provides unique support for HDMI 2.0a, HDR, high-fidelity video scaling, windowing and audio down-mixing, broadcast quality scaling, visually indistinguishable light-compression, multi-source video compositing, video splitting, color space conversion, frame rate conversion, audio embedding / de-embedding, audio down-mixing and audio re-sampling.
Decoder with Copper Interface
The IP Flash Caster RS-124-31 Series is a 1U Rack Mount AV over IP product that can be configured and ordered in flavor of dual SDVoE encoders or decoders with Copper or Fiber interface and different video signal format inputs and outputs. The IP Flash Caster RS-124-31 provides numerous configurations and functionalities to meet ever changing requirements of ProAV events. The RS-124-31 minimizes installation time and effort while also providing a significant maintenance advantage and configuration flexibility.
Decoder with Fiber Interface
The IP Flash Caster RS-124-31 Series is a 1U Rack Mount AV over IP product that can be configured and ordered in flavor of dual SDVoE encoders or decoders with Copper or Fiber interface and different video signal format inputs and outputs. The IP Flash Caster RS-124-31 provides numerous configurations and functionalities to meet ever changing requirements of ProAV events. The RS-124-31 minimizes installation time and effort while also providing a significant maintenance advantage and configuration flexibility.